Construction Standards
Version 3.5Define Standard Construction Methods and Dimensions per Group
Construction Standards
Construction standards define the typical appearance, style, material dimensions and assembly methods of catalog items. By defining these standard options at the group level entire sets of cabinets can be designed and presented with a unified build method as well as a consistent look and feel.
Cabinet Options

- Cabinet Box Depths measured from the front of box, does not include the door/drawer front thickness.
- Cabinet Box Heights for wall and tall are measured from top to bottom of box. Base cabinets are measured from the top of the box to the floor so altering the toe height does not affect the overall height of the base cabinet when placed.
- Drawer Front Height for typical under counter base cabinets. Height is the finished dimension of the front.
- Toebase Height and Setback are measured from the floor and face of the cabinet box.
- Back Types - None for a pass through box, normal for a 1/4" / 6mmm (set in Parts) typical melamine/veneer style, full for a 3/4" / 19mm (set in Parts) full thickness back.
- Light Rail - Shortens wall cabinets from the bottom, adds a flush horizontal filler under cabinet and extends doors by the specified dimension.
Face Frame

- Face Frame Bead creates an inset beaded face frame when face frames are enables.
- Face Frame Width - Set to 0 to disable face frame. Setting a width >0 resizes door and drawer fronts to inset them inside a frame drawn with the defined width.
- Face Frame Thickness - Set to door/drawer thickness + "Door Front Reveal Back" (set in Front) for a frame flush to the inset fronts.
Front

- Mid-Rail Max Height - Defines the maximum height of a door panel before a mid rail is added for stability.
- Door Front Reveal Back - Panel offset from cabinet box face, typically the same as bumper thickness.
- S/R Widths affect stile and rail door & drawer fronts
Drawer Box

- Drawer Box Capture Bottom - Increase reported cut size to insert bottom into drawer box edge dados. Does not affect modeled visual dimensions.
Parts

- Typical part and material dimensions
Product Reference: https://sketchdata.com/design-tools